How to change tires on Buick: hot topics and practical guides on the Internet in the past 10 days
Recently, car maintenance and emergency handling have become hot topics on the Internet, especially the practical skill of changing vehicle tires has attracted widespread attention. This article will combine the hot content on the Internet in the past 10 days to provide Buick owners with a detailed tire replacement step guide, and attach relevant data for reference.
1. Top 5 hot topics in the automotive field in the past 10 days

| Ranking | topic | heat index | Main discussion platform |
|---|---|---|---|
| 1 | Winter battery life of new energy vehicles | 98,000 | Weibo/Zhihu |
| 2 | Recommended self-driving travel equipment | 72,000 | Xiaohongshu/Autohome |
| 3 | Emergency tire changing tips | 65,000 | Douyin/Bilibili |
| 4 | Buick new model review | 53,000 | Understand the car emperor/Hupu |
| 5 | Tire Buying Guide | 49,000 | JD/Tmall |
2. List of necessary tools for tire replacement on Buick models
| Tool name | Specification requirements | Storage location (typical Buick models) |
|---|---|---|
| Jack | Bearing capacity ≥1.5 tons | Trunk tool slot |
| Cross wrench | 17-19mm | Vehicle tool kit |
| Spare tire | T125/70R16 (Take Regal as an example) | Lower trunk level |
| anti-theft bolt key | Model specific | Glove box/tool bag |
| warning triangle | Comply with national standards | Trunk side mesh pockets |
3. Detailed steps for tire replacement on Buick (applicable to mainstream models such as GL8/Regal/Yinglang)
1.Safety preparation: Park the vehicle on a flat and hard road, turn on the double flashers, place a warning sign 50 meters behind the vehicle, and pull on the electronic handbrake.
2.loose bolt: Use a wrench to loosen the tire bolts counterclockwise (note: some Buick models need to remove the hub cap first).
3.Jacking up the vehicle: Find the support point of the chassis jack (refer to the location marked in the user manual), and slowly jack up until the tire is 2-3cm off the ground.
4.Replace tires: Completely remove the bolts, install the spare tire immediately after removing the old tire, and tighten all bolts manually.
5.final tightening: After lowering the jack, tighten the bolts with all your strength in a diagonal sequence (recommended torque: 110N·m).
4. Precautions
| Risk point | solution |
|---|---|
| Spare tire speed limit | Buick spare tire speed limit is 80km/h |
| Bolts are rusty | Spray WD-40 for lubrication in advance |
| Abnormal tire pressure | Standard tire pressure of spare tire: 4.2Bar (requires regular inspection) |
| Electronic system interference | Tire pressure monitoring needs to be reset after replacement (press and hold the SET button for 3 seconds) |
5. Comparison of popular tire brands in 2023 (refer to recent e-commerce data)
| brand | Quietness | Wear resistance index | Wetland performance | Suitable for Buick models |
|---|---|---|---|---|
| MICHELIN PRIMACY 4 | ★★★★★ | 340 | Class A | LaCrosse/Angke Banner |
| Goodyear Royal Ride II | ★★★★ | 420 | Class B | Yinglang / Weilang |
| Dunlop VEURO VE303 | ★★★☆ | 380 | Class A | GL8/Junwei |
Recent social platform data shows that more than 62% of Buick owners will choose to replace their tires instead of waiting for rescue when they encounter a puncture. Mastering standardized tire changing skills not only saves time and cost, but is also an important guarantee for driving safety. It is recommended that car owners check the status of their spare tires every six months and promptly go to a 4S store for professional inspection after replacement.
check the details
check the details